Combustion master CS Analyzer is used to determine Carbon and Sulfur in inorganic samples like alloys like steel, metals, minerals, ores, soil and other inorganic samples. The sample will be burnt in the induction furnace together with accelerators in pure oxygen. The usual combustion temperature is about 2200 °C. During the combustion the carbon components will be oxidised to CO2 and the sulphur components to SO2. The combustion gas will then be led to the detec- tors, which will determine the CO2 and SO2 concentrations by IR absorption. From the received data of the sample the PC is calculating the concentrations of carbon and Sulphur .Carbon and sulphur in the sample are analysed simultaneously in less analysis time.
|
Furnace
|
PC Controlled induction furnace with automatic cleaning device
|
|
Power
|
2.2 kVA , 19.5MHz, 2200 ° C usual operating temperature
|
|
Power supply
|
230 VAC (+/- 10 % ), 50/60 Hz,16 A , 3.0 kVA max
|
|
Dimensions
|
W, H, D: 670mm, 870mm, 800mm weight: 130kg
|
|
For operation needed
|
PC, monitor (included in the scope of supply ), Balance (resolution 0.0001g)
|
|
Measuring Range
|
Carbon: 0 ppm -0.2 % to 0.2 % -6 %
|
|
Sulfur: 0 ppm -0.3 % to 0.3 % -30 %
|
|
|
Detection method
|
Solid state infrared absorption with up to 4 independent detector units
|
|
Typical sample weight /Analysis time
|
500mg to 1 g/ 50s
|
|
Reagents
|
Anhydrous magnesium perchlorate, Sodium hydroxide, rare earth copper oxide
|
|
Sensitivity / Precision
|
Carbon: 0.1 ppm / ± 0.5 ppm
|
|
Sulphur: 0.1 ppm / ± 0.8 ppm
|
Combustion master CS Analyzer is used to determine Carbon and Sulfur in inorganic samples like alloys like steel, metals, minerals, ores, soil and other inorganic samples. The sample will be burnt in the induction furnace together with accelerators in pure oxygen. The usual combustion temperature is about 2200 °C. During the combustion the carbon components will be oxidised to CO2 and the sulphur components to SO2. The combustion gas will then be led to the detec- tors, which will determine the CO2 and SO2 concentrations by IR absorption. From the received data of the sample the PC is calculating the concentrations of carbon and Sulphur .Carbon and sulphur in the sample are analysed simultaneously in less analysis time.
Analyser- Set Combustion Master CS (1xS) Elemental Analyzer, Sulfur Analyzer with one Infrared Detector
Analyser- Set Combustion Master CS (2xS) Elemental Analyzer, Sulfur Analyzer with Dual Infrared Detector
Analyser- Set Combustion Master CS (1xC + 2xS)
Elemental Analyzer Carbon & Sulfur Analyzer with one carbon IR detector and Two Sulfur IR Detectors
Analyser- Set Combustion Master CS (2xC + 1xS)
Elemental Analyzer Carbon & Sulfur Analyzer with one Sulfur IR detector and Two carbon IR Detectors (Low and High range)
Analyser- Set Combustion Master CS (2xC + 2xS) Elemental Analyzer, Carbon & Sulfur Analyzer with two carbon IR detectors and Two Sulfur IR Detectors (Low and High range)
